Toolcin

Make a 2x2 inch passport photo at home

A US passport photo is 2 × 2 inches (51 × 51 mm). At 300 DPI that is 600 × 600 pixels. The head must be 1 to 1 3/8 inches tall, the background plain white or off-white, and the face fully visible with no glasses.

Open the Passport Photo Maker tool

Passport photo rejections are rarely about the camera. They are about head height, background tone and shadow. Get those three right and a phone photo works as well as a studio one.

The numbers

RequirementValue
Print size2 × 2 inches (51 × 51 mm)
Pixels at 300 DPI600 × 600
Head height1 inch to 1 3/8 inches (25 to 35 mm)
Eye height from bottom1 1/8 to 1 3/8 inches (28 to 35 mm)
BackgroundPlain white or off-white, no pattern
ColourFull colour, natural skin tone

Other countries differ. The UK and most of the Schengen area use 35 × 45 mm. India uses 51 × 51 mm for several applications. Check the authority that will receive the photo before you crop, because a 2 × 2 photo submitted to a 35 × 45 office is rejected on size alone.

Taking the photo

  1. Stand facing a plain wall a metre away, in daylight from a window in front of you. Overhead light puts shadows under the eyes and nose, which is a common rejection.
  2. Hold the phone at eye level, not below. A low angle widens the jaw and changes the proportions a reviewer expects.
  3. Neutral expression, mouth closed, eyes open. No smile, no tilt. Remove glasses: reflections and frames are a frequent cause of rejection.
  4. Leave space above the head. Crop later; do not fill the frame in camera.

Cropping to the exact spec

The part people get wrong is head height, not frame size. A 600 × 600 crop where the head fills the frame is wrong even though the dimensions are right. The head — chin to top of skull — should occupy between half and two thirds of the height, with a margin above.

A passport photo tool does that measurement for you: it draws the head-height guide, then exports at 600 × 600 with the right margin, so the file you print is already compliant.

Printing at home

Print at 300 DPI on glossy paper, and set the print dialog to actual size rather than "fit to page". Fit-to-page silently rescales the image, which changes the head height in millimetres and can invalidate an otherwise perfect photo. If your printer cannot hold 300 DPI reliably, a pharmacy print is cheaper than a rejected application.

Digital submissions

Some portals want the photo as a file rather than a print. Those usually specify a pixel size and a byte limit together, for example 600 × 600 and under 240 KB. Meet both: a correctly sized photo that exceeds the byte limit is still rejected, and shrinking the byte count without resizing the pixels damages the face.

Questions

Can I use a phone photo for a passport application?

Yes. Several official guidance pages explicitly allow it as long as the size, background and head height meet the rules. Lighting matters more than the camera.

Why was my photo rejected for a shadow?

Reviewers reject uneven lighting because it can obscure facial features. Stand facing a window, not under a ceiling light, and check for a shadow on the background behind you.

Does the photo need to be recent?

Usually within the last six months. If your appearance has changed, use a newer photo rather than an older one that matches the old passport.

Is this photo tool free and private?

Yes. The crop and resize happen in the browser tab, so the photo is never uploaded to a server.

Updated 2026-11-16 · written for this site, no trackers, no account.