Toolcin

QR code with a logo in the middle

Use a high error-correction level (H, about 30% recoverable), keep the logo under roughly a quarter of the code's area, and leave the quiet zone around the edge clear. Then scan it with two different phones before you print.

A QR code is a grid of modules, and every module carries information. Cover some in the middle with a logo and the code still works — not because scanners guess, but because the code was built with redundancy.

Error correction is the budget

LevelRecoverable damageUse when
L~7%Clean digital display, no logo
M~15%Default, printed material
Q~25%Small print, or a small logo
H~30%Any logo in the centre, or a damaged surface

Level H is the right choice whenever a logo sits in the middle. The cost is a denser code — more modules for the same data — which needs a slightly larger print size to stay scannable.

How big can the logo be

Keep it under about 25% of the total area. A logo covering a quarter of the code leaves the error-correction budget intact for real-world problems like a scuffed surface or a bad camera angle. Push past a third and scanning becomes unreliable in low light, which is exactly where people try.

The quiet zone

Scanners need a margin of empty space around the code — at least four modules wide, ideally more. A logo design that bleeds to the edge, or a code placed on a busy photo without a white border, fails for a reason that has nothing to do with the logo.

Contrast and colour

Dark modules on a light background is the reliable arrangement. Inverting it works on some scanners and not others. Avoid two similar tones: mid-grey on light grey photographs badly to a phone camera, even though it looks elegant on screen.

Test before printing

  1. Scan from the screen at normal size, then from a printed proof at the final size.
  2. Use two phones, ideally one older model. Old cameras are the real test.
  3. Try it at arm's length in poor light — a menu in a dim restaurant, a poster in a corridor.

What a logo does not fix

A branded code still fails if the destination is broken. Check the URL after you export: a shortened link that expired, or a typo in a long path, is invisible in the design and total in effect. Print a batch only after the destination is live.

Questions

Will a logo stop my QR code from scanning?

Not if the error-correction level is H and the logo stays under about a quarter of the area. Beyond that, reliability drops quickly in poor light.

Should I use PNG or SVG for print?

SVG or a high-resolution PNG. A QR code is vector data; scaling a small PNG for print produces blurry module edges that scanners struggle with.

Does a bigger logo make the code more brandable but less scannable?

Yes. That trade-off is the whole design decision. Test at the final print size rather than trusting the preview.

Is the data sent anywhere?

No. The code is generated in the browser; nothing is uploaded.

Updated 2026-11-16 · written for this site, no trackers, no account.