Resistor Color Code

Four dropdowns, a coloured preview of the resistor, and the resistance in ohms — the classic table, live.

Checked in a browser on 2026-11-19 · how these tools are tested · runs on your device

How Resistor Color Code works

Read resistor bands into ohms (and see the band colours for a value) with tolerance included. The method behind Resistor Color Code is the single-purpose logic inside leader-tech.js, and this page shows the result with its assumptions in the open.

  • Set the four band colours from the dropdowns.
  • The page computes value = (digit1 × 10 + digit2) × multiplier.
  • A coloured preview shows the bands in order.

A worked example for Resistor Color Code

Brown-black-red-gold: (1×10 + 0) × 100 = 1,000 Ω ±5% — a 1 kΩ resistor.

Check one term you already know the grade for — if the cumulative figure matches, the weighting is being applied the way your institution does it. That check applies directly to Resistor Color Code with resistor color code.

    When to use Resistor Color Code — and when not to

    Reasonable uses: Checking a GPA before an application; Planning a study week; Printing a practice sheet. Resistor Color Code is deliberately narrow: it does one job and states its assumptions instead of hiding them.

    Student portals show official grades but rarely let you model a what-if. That modelling is the whole point here. The honest ceiling for Resistor Color Code: four-band resistors only; five-band adds a third digit.

    • Best case for Resistor Color Code: Checking a GPA before an application
    • Also fine with Resistor Color Code: Planning a study week
    • Not what Resistor Color Code is for: four-band resistors only; five-band adds a third digit.

    Reading the Resistor Color Code result

    The output of Resistor Color Code is a function of the inputs alone — no hidden state and no server.

      Accuracy and limits of Resistor Color Code

      The method is the single-purpose logic inside leader-tech.js. Resistor Color Code prints results at the precision its inputs justify, and the limits below are the honest ones:

      • Resistor Color Code: Four-band resistors only; five-band adds a third digit.
      • Read from the end opposite the tolerance band.
      • Pure table maths.

      Privacy and speed on the Resistor Color Code page

      The Resistor Color Code page is a static file plus leader-tech.js; there is no upload endpoint behind it, so your input cannot be stored or logged. Closing the tab discards the work.

      Speed follows the build: Resistor Color Code loads one stylesheet and one script, with no framework, no web font and no tracker. That is why the tool responds as you type instead of waiting on a round trip.

        What you get from Resistor Color Code

        The output of Resistor Color Code appears on this page and can be copied or downloaded in the format the page offers. Nothing is queued, nothing is emailed, and there is no usage counter — the education work finishes the moment the numbers are in.

        Because Resistor Color Code is built from leader-tech.js rather than a server call, the practical ceiling is your device: memory for large inputs, and CPU for anything that loops over pixels or pages. On a normal laptop that ceiling sits far above everyday use; on an old phone it arrives sooner, and the page tells you when a job is too big instead of failing silently.

          Practical notes for Resistor Color Code

          Real resistors come in E-series values (E12, E24), so a computed 1,000 Ω is a real part while 1,037 Ω is not — round to the nearest standard value when ordering. Read the bands from the end opposite the tolerance band; if both ends look alike, the wider gap usually sits next to the tolerance. Five-band parts add a third significant digit, which this page does not attempt.

            Questions

            How do I read the bands?

            From the end opposite the tolerance band: digit, digit, multiplier, tolerance. Silver or gold is the tolerance.

            What about 5-band resistors?

            They use three digits and a temperature coefficient — check the datasheet; this page does the classic 4-band.

            How accurate is Resistor Color Code?

            The method is the single-purpose logic inside leader-tech.js. Four-band resistors only; five-band adds a third digit.

            What are the limits of Resistor Color Code?

            Read from the end opposite the tolerance band.

            Is anything uploaded when I use Resistor Color Code?

            No. Resistor Color Code runs entirely in the browser tab; nothing is uploaded, stored or logged.

            Can I use Resistor Color Code offline?

            Yes — Resistor Color Code keeps working offline once the page has loaded; the whole tool is a local script.

            Keep going

            More education tools